潜射无人机及其对潜艇作战带来的变化

从水下航母的历史出发,简述了现代战争对潜射无人机的需求,分析了潜艇(尤其是核潜艇)装备潜射无人机的优势和给作战带来的变化,说明了它对发展水下航母的重要性。之后,以美国潜射无人机研发为例,总结了其研究进展,探讨了它目前面临或需要解决的问题,表明了其发展方向。     

基于营区精、气、神文化表达的自然仿生设计

精、气、神文化是营区规划设计的核心.自然仿生设计为营区精、气、神文化的表达提供了独特而有效的方式.通过对营区精、气、神文化的解读,发掘出自然仿生的3个层面,即“形”之仿生,“意”之仿生和“结构”之仿生.在营区规划设计中,当自然仿生的这3个层面得到有效表达,实现有机统一,营区就会产生独特的文化气质与魅力,从而体现其精、气、神特色,展现部队的“军营魂”.     

钢管在冲击荷载作用下的变形与失效破坏

为研究钢管在弹体侵彻过程中的变形特点,基于ANSYS/LS-DYNA软件,采用Johnson-Cook模型,模拟了半球形弹体以不同速度正向冲击钢管时的非线性动力响应情况。结果表明：弹体速度越小,钢管的抗侵彻性能越好;弹体速度越接近临界破坏速度,钢管降低弹体速度的能力就越明显;弹体冲击钢管时,钢管上表面比下表面更容易产生大变形,消耗更多的弹体动能,并在抗侵彻过程中伴有局部凹陷、蝶形变形和贯穿现象。实验结果可为圆柱壳结构钢管在冲击荷载作用下的耗能分析提供参考。     

雷达虚拟维修训练中交互系统的通用性

基于USB接口技术对"通用雷达装备虚拟维修训练系统(URVMTS)"的人机交互系统进行研究,通过合理的软、硬件设计实现了系统的通用性。不同的实装操作部件经过适当的信号调理均可以通过该系统方便地实现与雷达虚拟样机之间的交互。着重介绍了交互系统的通用性设计与实现方法,包括系统的通用性设计方案,USB硬件电路的通用性设计及相应的软件开发。     

Optimization of resistance spot brazing process parameters in AHSS and AISI 304 stainless steel joint using filler metal

The aim of this research study was to determine optimal resistance spot brazing parameters for joining between AHSS and AISI 304 stainless steel by using filler metal. The key parameters investigated in this study consist of the brazing current, electrode pressure and brazing time. The Taguchi method was applied to the design of experiments. Signal-to-Noise ratio was introduced in the study to identify optimal levels from the process where input parameters yield increased shear strength. Brazing was thus implemented with 5,000A brazing current, 0.70 MPa electrode pressure, and 1.50s brazing time. The maximum shear strength obtained was 54.31 N·mm⁻² in accordance with input parameter settings. In addition, Cu-rich phase and Ag_0.4Fe_0.6 intermetallic phases were found at the interface zone.     

Body armour – New materials,new systems

This is a very timely review of body armour materials and systems since new test standards are currently being written, or reviewed, and new, innovative products released. Of greatest importance, however, is the recent evolution, and maturity, of the Ultra High Molecular Weight Polyethylene fibres enabling a completely new style of system to evolve – a stackable system of Hard Armour Plates. The science of body armour materials is quickly reviewed with emphasis upon current understanding of relevant energy-absorbing mechanisms in fibres, fabrics, polymeric laminates and ceramics. The trend in on-going developments in ballistic fibres is then reviewed, analysed and future projections offered. Weaknesses in some of the ceramic grades are highlighted as is the value of using cladding materials to improve the robustness, and multi-strike performance, of Hard Armour Plates. Finally, with the drive for lighter, and therefore smaller, soft armour systems for military personnel the challenges for armour designers are reported, and the importance of the relative size of the Hard Armour Plate to the Soft Armour Insert is strongly emphasised.     

Phenomenological modelling of flow behaviour of 20MnMoNi55 reactor pressure vessel steel at cryogenic temperature with different strain rates

In the present study a phenomenological constitutive model is developed to describe the flow behaviour of 20MnMoNi55 low carbon reactor pressure vessel (RPV) steel at sub-zero temperature under different strain rates. A set of uniaxial tensile tests is done with the variation of strain rates and temperature ranging from 10⁻⁴ s⁻¹ to 10⁻¹ s⁻¹ and -80 °C to −140 °C respectively. From the experimental data, family of flow curves at different temperatures and strain rates are generated and fitted exponentially. The strain rate and temperature dependence of the coefficients of the exponential flow curves are extracted from these curves and characterised through a general phenomenological constitutive coupled equation. The coefficients of this coupled equation are optimised using genetic algorithm. Finite element simulation of tensile tests at different strain rates and temperatures are done using this coupled equation in material model of Abaqus FEA software and validated with experimental results. The novelties of proposed model are: (a) it can predict precisely the flow behaviour of tensile tests (b) it is a simple form of equation where fitting parameters are both function of strain rate ratio and temperature ratio, (c) it has ability to characterize flow behaviour with decreasing subzero temperatures and increasing strain rates.     

钢结构防火材料应用问题及对策探讨

介绍了钢结构防火涂料的分类及特性，分析了钢结构建筑在火灾中的特点，探讨了钢结构防火涂料在技术和应用方面存在的问题，提出了钢结构建筑防火涂料施工时应注意的事项等对策。     

固定翼反潜巡逻机作战效能评估

运用改进的Topsis评估模型对反潜巡逻机的作战效能进行评估,主要是对指标权重的计算方法进行改进:综合考虑客观熵权和专家主观权重得到综合权重,通过客观的熵权信息来调整主观权重的偏差,使得反潜巡逻机作战效能的评价结果更为合理。实例分析表明,该方法能够主客观相结合,简单有效,具有一定的推广应用价值。     

几种坦克用钢氮离子注入强化试验

对10、38CrSi、20Cr2Ni4A等坦克用钢的氮离子注入强化进行了试验。结果表明:注入后的试样,硬度和相对耐磨性都有不同程度的提高。硬度的测试结果与试验载荷有关。